NSFOCUS ADS NX3 10000 Series, Installation Manual

Page: 35 / 46

NSFOCUS ADS Installation Guide
Copyright © NSFOCUS 29 V4.5R90F01SP07C236 (2019-11-19)
4
Initial Configuration
The device can operate properly after you complete simple network configuration and import
a valid certificate. Network configuration involves the following:

IP address

Subnet mask

Gateway

DNS Server
Network configuration can be conducted on the console or the web-based manager. Both
approaches require a computer and accessories (included in the accessory box). Choose an
approach as required.
To perform configurations on the console, you need to connect the device to a computer with
a console port cable. The console port rate of ADS devices is 115200 bps. After login, you can
perform configurations by selecting menus. For details, see section
4.2 Network
Configuration on the Console .
To perform configurations on the web-based manager, do as follows:
Step 1
Use a crossover cable (included in the accessory box) to connect the working interface on the
device to the network interface on the computer.
Step 2
Configure computer-related parameters to make it in the same network segment as the device.
See appendix
A Default Parameters for specific parameter settings.
Step 3
Log in to the web-based manager through HTTPS and configure the device. For details, see
sections
4.3 Login to the Web-based Manager and 4.5 Network Configuration on the Web-
based Manager .
----End
The license file can be imported only via the web-based manager. It is recommended that you
import a certificate file the first time you log in to the web-based manager.
4.1
Login to the Console
Before logging in to the console, the administrator needs to prepare the following:

One computer

One serial cable included in the accessory box