NSE UC-100, User Manual

Page: 9 / 28

Caution:
i. The device requires no calibration.
ii. The device contains no user repairable and serviceable parts.
iii. No modification of this equipment is allowed.
iv. Disposal
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for information
regarding the collection systems available. If electrical appliances are
disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and
well-being.
v. The device is not suitable for use in the presence of flammable anesthetic
mixtures with air or with oxygen or nitrous oxide.
vi. Manufacturer will provide circuit diagrams, component part lists,
descriptions, calibration instructions to assist to SERVICE PERSONNEL in
parts repair.
vii. Additional equipment connected to medical electrical equipment must
comply with the respective IEC or ISO standards (e.g. IEC 60950 for data
processing equipment). Furthermore all configurations shall comply with the
requirements for medical electrical systems (See IEC 60601-1 or clause 16
of the 3Ed. of IEC 60601-1, respectively). Anybody connecting additional
equipment to medical electrical equipment configures a medical system
complies with the requirements for medical electrical systems. Attention is
drawn to the fact that local laws take priority over the above mentioned
requirements. If in doubt, consult your local representative or the technical
service department.
4