NSE UC-100, User Manual

Page: 14 / 28

Open the specific software to real-time view and record the image under
endoscope. After opening the specific software, you can use the LED light
brightness adjust button to adjust output brightness.
Before using, you can target endoscope to white object like white paper and
long press button to auto-adjust white balance parameters.
After using, please close the PC software, then unplug the UC-100, and keep
UC-100 in the packing box.
Caution: UC-100 can only be connected to the USB3.0 port for normally
use.
Caution: Please refer to the software user manual, and you can view the
software version by the ABOUT menu.
Warning: Please do not directly sight the LED light beam in short distance.
Warning: Please do not disassemble the product and spare parts like LED
light etc. Any malfunction or failure, please stop using it and contact with your
distributor or directly to the manufacturer.
4 Product Cleaning and Maintenance
4.1 Cleaning Methods
a) Suggested to use the sterilized cotton immersed in 70% aldehyde or
isopropyl made detergent or 75% made medical alcohol to wipe the product
surface, and please to wipe the glass gently.
b) The USB interface should be mounted by cap when cleaning.
c) Using the distilled water to wash the product, and using the dry soft fabric
to dry the product surface.
Warning: Do not touch the lens, or use the hard objects to scrub the lens.
Caution: Please clean UC-100 and keep it in packing box if long-time no
use.
Caution: Please keep UC-100 dry after cleaning.
9