background image

     CAUTION: Do not stare at the lamp or aim the lamp at patient’s eye in use.

1.3 Contraindications

No contraindication(s).

1.4 Product Feature

    Optical System
Aspheric optical design and nano-processing can improve the utilization of 
light energy significantly, and with the precise light-averaging system the 
product outputs more bright and uniform spot with clear boundary. The 
sophisticated lights path design significantly realizes no-shielding excellent 
coaxial and achieves even smaller lamp housing diameter.

    Positioning Mechanism
The flexible housing connector is made of special material, which leads to 
fully adjustable light beam direction. This structure makes operation more 
simple and convenient, and it can maintain good performance after lots of 
adjustments.

    Circuit System
The low-power intelligent constant-current control based on SMPS 
technology realizes super-long working time, and the brightness maintains 
constant without any decline caused by low battery power. The auxiliary 
circuits of battery power monitoring, grading illumination adjustment and 
overheating protection can effectively increase the lifetime of battery and 
LED.

    General Structure
With the ingenious and compact wireless design, all wires are completely 
embedded into the ultra-thin headband. The precise and lightweight crucial 
parts and unique high strength materials make the product even portable.

2

Summary of Contents for EL-P Series




























Reviews: