6
OPERATION
Please always pair the monitor and camera before the 1
st
operation, please refer
to below “Pairing” step.
There are 5 control buttons available for users to have their controls:
Power button
Press the POWER button to supply power to the monitor. The picture on the monitor will
automatically turn on when the vehicle is in reverse gear (when already paired as described
below). When the monitor gets an image, the blue LED will be lit. If there is power to the
monitor, but the monitor does not get any image, the blue LED will blink on and off. When
the monitor power is off, no picture can appear on the screen and the blue LED will be off.
Menu button
Press the Menu button to enter the menu screen as shown below: Picture SPEC, Picture
Direction, Pair, Product Information.
dfDF
In general please select the desired menu by pressing the arrow buttons and
Confirm your choice with the Power Button.
Pairing:
Select the
“SETUP”
icon with the arrow buttons and press the Power button. Shortly after
please press the rubber button on the bottom of camera until the signal is well received by
the monitor and “OK” appears on the screen. The unit will work properly and will
automatically pair by itself in the future operation. Press the menu button to exit the
selection or it will automatically exit after 30s.
Menu button
Guideline button
Power button
Arrow button
Arrow button
