3
Slide the blue clamp levers outwards to unlock the
ratchet clamps. While holding the clamp levers open,
slide the ratchet clamps up until the clamp plates
make contact with the bottom of the bed frame.
4. Lock the Clamps
Release the blue ratchet clamp lever to lock the
clamps in place.
USING THE TIGHTENING LEVER
Before use, the bed rail must be fully secured using
the tightening lever. The tightening lever operation
is di
ff
erent depending on the type of bed you have.
1. Slatted Bed Frame Tightening
Turn the tightening lever clockwise until you start to
feel tension and the bed rail feels secure.
Note:
Lightweight beds may raise o
ff
the
fl
oor when
tightening the tightening lever. If this happens,
slacken the lever until all four corners of the bed are
in contact with the ground.
2. Divan and Low Bed Frame Tightening
Full turns of the tightening lever may not be possible
on some divan and low frame beds. Use the following
steps to adjust the bed rail;
Step 1
Rotate the tightening lever clockwise by half a turn.
Step 2
A
Lift the tightening lever to disengage it from the
thread. While holding the lever up, rotate it anti-
clockwise by half a turn.
Note:
You may need to hold the threaded part (A) to
stop it rotating with the lever.
Step 3
Release the tightening lever, this will re-engage the
thread.