2
HANDRAIL ASSEMBLY
1. Fit the Handrail Assembly to the Base:
Note:
Make sure the bed clamp plates point in the
direction shown.
Slot the handrail assembly onto the 4 base pins.
Push the handrail down until it makes contact with
the base.
PREPARE BED RAIL FOR INSTALLATION
1. Lower the Ratchet Clamps
Slide the blue clamp levers outwards to unlock the
ratchet clamps. While holding the clamp levers
open, slide the ratchet clamps down until they make
contact with the base.
2. Lower the Tightening Lever
Turn the tightening lever clockwise until you start to
feel slight tension. Do not over tighten as this will
start to lift the handrail assembly o
ff
the base frame.
FITTING TO THE BED
Make sure that the
fl
oor surface is level and even.
The bed base must be at least 30mm above the
fl
oor
and clear of obstructions.
1. Slide the Bed Rail Under the Bed
Slide the bed rail under the bed, in an approximate
position, until the handrail contacts the bed.
2. Position the Bed Rail
320mm
Warning:
The bed rail position must be a minimum
of 320mm from the bed headboard/wall.
Position the bed rail so the user can reach the
handrail from a laying position without having to
stretch.
3. Clamp the Bed Rail to the Bed