38
BA_v2_eagle_parallel_EN_1-0
o
peRaTion
To save with the normal acceptance band:
6a
Reset DIL switch S2.9 to OFF (down).
The system indicates successful saving with a single
actuation of the acceptance gate and an error at saving
with a double actuation (a brief clicking noise in each case) if the acceptance band of the
inserted coins and that of an already programmed coin channel overlap or the generated
measured values are too different and the tolerances would be too high, for example.
To cancel the process first set the DIL switch of the respective coin channel
(S2.1–8, here: S2.3) and then DIL switch S2.9 to OFF (down).
To save with the wide acceptance band:
6b
Set an additional DIL switch S2.1–8 (here: S2.1) to ON (up).
The acceptance band has been widened.
Now you can reset DIL switch S2.9 to OFF (down).
The system indicates successful saving with a single
actuation of the acceptance gate and an error at saving
with a double actuation (a brief clicking noise in each
case) if the acceptance band of the inserted coins and that of an already programmed coin
channel overlap or the generated measured values are too different and the tolerances
would be too high, for example.
To cancel the process first set the DIL switch of the respective coin channel
(S2.1–8, here: S2.3) and the additional DIL switches for the wide acceptance
band (here: S2.1) and then DIL switch S2.9 to OFF (down).
7
Reset DIL switches S2.1–8 to the position for normal operation.
8
Remount the coin validator in the machine.
9
Switch power off and on again.
The coin validator will now accept the new coin/token for payment.
S2
S2
S2
Summary of Contents for v2 eagle
Page 2: ......
