O
PERATION
G-13.mft MDB/S1
32
National Rejectors, Inc. GmbH, Buxtehude
Please refer to the label of the device to see which coin type has been
assigned to which coin channel at the factory. However, this assignment
can be changed at any time using the WinEMP PC configuration software
or PalmEMP2.
If all coin types are to be accepted for payment at the vending machine, the
DIL switches S1.1–S1.8 and S2.1–S2.8 of the two switching blocks are in
the lower position on OFF. If you want to inhibit a coin channel, you only need
to move the respective DIL switch toward the top to ON.
Example
(the coin validator is no longer supposed to accept the coin(s) assigned to coin
channels 3 and 10, which means that coin channels 3 and 10 must be
inhibited)
With the DIL switches in these positions, the coin validator no longer
accepts the coin type(s) assigned to coin channels 3 and 10!
If a normal coin channel and a narrow coin channel have been
programmed on the coin validator for one coin type, the normal coin
channel must be inhibited as described above in order to activate
the narrow coin channel. If both channels are activated, the wider
acceptance band of the normal coin channel is used.
If a coin type is to be inhibited, both coin channels must be
inhibited.
Summary of Contents for G-13.mft MDB/S1
