Before you begin installing the door operator, please read thoroughly these instructions, keep the
manual for future reference or pass it on to the subsequent owner of the door.
The door operator has been designed for safe use in operation but safety can only be assured if
the safety instructions are strictly adhered to during the installation and during use.
•
The door should be balanced and any
obstacles removed. Springs, guides and other
moving parts should be in good condition.
•
Do not wear jewellery or loose clothing
during the installation.
•
During electrical connection, local building
and electrical regulations should be adhered
to, this device complies with protection class 2
and does not require earthing.
•
Once installed the auto reverse system should
undergo a test, upon contact with a 50mm
solid object from the ground, the garage door
should stop and then re-open.
•
Warning signs should be used to warn of door
opening and closing.
•
Do not allow children or untrained users
access to the controls including radio controls.
•
Always watch a moving door keeping people
away from the door until fully open or closed.
•
Frequently examine all moving parts
paying particular attention to the
cables, springs, mountings looking
for wear and tear.
•
Do not use if any fault or mechanical
damage is evident as this may cause
injury.
•
Garage door openers should only be
installed by fully trained installers.
•
Service and repairs should only be
carried out by fully trained installers.
Please start by reading the safety instructions
Contents
