3
Operation
Theory
PCS-978 Transformer Relay
3-80
Date: 2013-01-16
inputs are not connected to external signals or settings.
3.6.5 Inputs and Outputs
IntTurn
I3P
U3P
En1
En2
Blk
St
Op
Figure 3.6-7 IntTurn Function block
Table 3.6-1 Input signals of IntTurn function block
No.
Signal
Description
1
I3P
Three-phase current data input
2
U3P
Three-phase voltage data input
3
En1
Function enabling input1 and input 2, it can be binary inputs or settings, such as function
enabling binary inputs, logic links, etc.
4
En2
5
Blk
Function blocking input, such as function blocking binary input.
When the input is 1, the protection is not reset.
Table 3.6-2 Output signals of IntTurn function block
No.
Signal
Description
1
St
Inter-turn fault protection starts.
2
Op
Inter-turn fault protection operates.
Above input signals and output signals can be used for programmable logic, and following output
signals are only for LCD display of equipment and oscillograph function.
Table 3.6-3 Output signals of IntTurn: report
No.
Signal
Description
1 IntTurn.Op
Inter-turn fault protection operates.
Tripping reports of protection element.
2 IntTurn.St
Inter-turn fault protection starts.
Start signals of protection element.
3 x.IntTurn.TrigDFR
Inter-turn fault protection picks up to trigger DFR function..
Signals of protection element triggering DFR function recorded as IO events.
3.6.6 Settings
Table 3.6-4 Settings of IntTurn
No.
Setting Item
Range
Step
Unit
Description
Summary of Contents for PCS-978
