background image

6-in-1 POWER PACK Owners Manual

 

Page 2

061410

'()#*#+,*#-").($*"#,

/01231456

Fire Hazard.

  Do not leave the compressor unattended while 

operating.  The compressor must be allowed to cool for ten 
minutes following each ten minutes of continuous use.

Do not expose the Power Pack to temperatures greater  
than 104°F (40°C).

Explosion Hazard:

 Do not use this unit where there are 

combustible fumes or gases.  Do not use in an enclosure 
containing automotive-style lead acid batteries.  

Risk of personal injury or death:

  Make sure the 

jumpstart is safely secured when transporting. If the unit is not 
properly secured during an accident the unit could hit the driver 
or passengers.

Risk of personal injury or damage to equipment:

  Do not 

exceed recommended air pressure of object being inflated.   
Do not exceed a pressure of 260 PSI.

Caution:

 Contains a sealed lead acid battery.  Keep dry. 

Do not drop.  Do not charge battery if frozen.  See owners guide 
for proper charging procedures.  Dispose of battery according to 
local regulations.

Warning:

 The output of the inverter is non-sinusoidal. 

Do not use the inverter with the following equipment:

-  Small battery-operated products such as rechargeable
  flashlights, some rechargeable shavers, and night-lights
  that are plugged directly into an AC receptacle to
  recharge.

-  Certain battery chargers for battery packs used in
  powered-hand tools. These chargers will have warning
  labels stating that dangerous voltages are present at the
  charger’s battery terminals.

If you are uncertain that non-sinusoidal power will cause 
damage to an item, check with the item’s manufacturer before 
using with the AC inverter.

CAUTION

WARNING

WARNING

CAUTION

WARNING

WARNING

WARNING

Summary of Contents for 149214





















Reviews: