NPK SCS-1002 Operating Manual Download Page 3

Page: 3 / 80

Version 0.2

SCS-1002

Hospital and refrigerator alarm system

This operating manual describes Hospital and refrigerator alarm system

SCS-1002 (hereinafter referred to as the System) and any options of its composition.

This operating manual describes composition, structure, operation, specifications

of the System and its components, instructions for the correct and safe operation of the
System (intended use, technical service, current repair, storage and transportation), and
disposal instructions for the System components.

Only those who have read and understood the System’s operational
documentation shall be permitted to operate with the System.

Only those who have read and understood this document and those who have had

special training shall be permitted to service the System according to the applicable
regulations.

TERMS AND ABBREVIATIONS

LCD

Liquid-crystal display

SPTA

Spare parts, tools and accessories

RCD

Reception and control device

Register

Russian Maritime Register of Shipping and Russian River Register

RMRS

Russian Maritime Register of Shipping

RRR

Russian River Register

Operating manual

SCS

Personnel call system

System components

Technical requirements

Check list

Technical service

ТS-1

Semi-annual technical service

ТS-2

Annual technical service

Summary of Contents for SCS-1002

















































































Search results

Summary of Contents for SCS-1002

Reviews:

Related manuals for SCS-1002

Brands by name

Popular brands

NPK SCS-1002, Operating Manual

Search results

Summary of Contents for SCS-1002

Reviews:

Related manuals for SCS-1002

Brands by name

Popular brands