6
⚫
防護罩進風口和出風口開孔率應大於
60%,
以確保足夠的迴圈風量，這對於延
長熱交換器的使用壽命和減少維護頻率非常的重要。
⚫
防護罩的進出風口應該防止氣流短路
,
以便熱交換器可以獲得最佳的冷卻效果。
Attention:
a) Heat exchanger does not need a cowling; Customers can put a cowling
outside unit according to themselves. The cowling can be made by customer self.
b) Shield inlet and outlet opening rate should be greater than 60%, To ensure
enough circulation heat exchanger volume. This is very important to have the
heat exchanger running with long lifetime and less service.
c) When you make a cowling design/installation, make sure the inlet heat
exchanger and outlet heat exchanger not been short cut, this is also critical to
keep unit have best cooling performance.
4.3
熱交換器安裝
Heat Exchanger Conditioner Installation
安裝步驟：
1.
在安裝面上畫出櫃門開孔示意圖，將空白部分切割掉。不同型號熱交換器的櫃
門開孔示意圖請參考相應規格書。
2.
根據安裝示意圖中示意的方向，將熱交換器安裝在機櫃上。
Installation steps:
1. Draw a schematic diagram of the cabinet door opening on the installation
surface and cut off the blank part. Please refer to the corresponding
specifications for the door opening diagrams of different types of heat
exchangers.
2. Install the heat exchanger on the cabinet according to the direction
indicated in the installation diagram.