background image

D

Limited Warranty

One Year Limited Warranty

All  Noyes  products  are  warranted  against 
defective  material  and  workmanship  for  a 
period of one year from the date of shipment 
to the original customer. Any product found to 
be defective within the warranty period will be 
repaired or replaced by Noyes. In no case will 
Noyes liabilities exceed the original purchase 
price of the product.

Exclusions

The warranty on your equipment shall not apply 
to defects resulting from the following:
• 

Unauthorized repair or modification

• 

Misuse, negligence, or accident

CE Information

These  instruments  have  been 
designed and tested to comply 
with  the  relevant  sections  of 

any  applicable  specifications  including  full 
compliance with all essential requirements of 
all applicable EU Directives.

Returning Equipment

To  return  equipment,  please  contact  Noyes 
to obtain additional information and a Service 
Request (S.R.) number. To allow us to serve 
you  more  efficiently,  please  include  a  brief 
description  specifying  the  reasons  for  the 
return of the equipment.
 

AFL Telecommunications

 

Noyes Test & Inspection

 

16 Eastgate Park Road

 

Belmont, NH  03220

 

Phone:  800-321-5298

 

 

603-528-7780

 

Fax: 

603-528-2025

Summary of Contents for SVA 1

















Reviews: