6000counts Intelligent scanning digital multimeter
7
/
7
2. The front end of the meter has NCV test points. As long as the point is close to the AC voltage, the buzzer will emit different continuations
according to the different strengths of the signals. At the same time, the LCD will display different number of segments according to the strength of
the signal.
五．
Automatic Startup & Shutdown
When the instrument stops using for about 15 minutes, the meter will automatically power off to enter the sleep state. To restart the power, press
and hold the
“
power
”
button for more than 2 seconds, the LCD will display
“
----
”
for automatic scanning, and the automatic shutdown symbol
“
APO
”
will be displayed. Press and hold the "hold" key while the power switch is turned on, the automatic shutdown function will be canceled, no
"APO" appears on the display.
symbol disappears, will cancel the automatic shutdown function.
六、
Troubleshooting
If your instrument does not work, the following method can help you solve the general problem, if the fault still can not be excluded, please
contact the service center or dealer.
Failure phenomenon
Inspection site and method
Not shown
Battery not connected
Replace the battery
Low battery symbol
Replace the battery
Current is not input
Replace fuse
Resistance display error
The test pen is not in contact
This manual is subject to change without notice;
The contents of this manual are considered correct. If the user finds any errors, omissions, etc., please contact the manufacturer;
The company does not bear the accidents and hazards caused by the user's wrong operation;
The functions described in this manual are not intended to reasons of the product for special purposes.
60000-0108D-181023
