nox-crete PFCS 3615 FN, Manual

Page: 12 / 12

12
USA IRL AUS GB NZ CDN IND
Problem Cause Remedy
Safety valves blows off
too early. Safety valve [7] is defective. Replace safety valve. (Fig. 20).
The trigger valve does
not close.
Liquid emerges without
the lever being activated. Seal [30] on the pressure bolt
not greased.
Defective valve pin assembly or
seal [30]. Grease the seal of the pressure
bolt.
(Fig. 22).
Replace the valve pin assembly
or seal.
(Fig. 22).
Pressure gauge is not
indicating any tank
pressure. Pressure gauge [16] defective. Replace pressure gauge. (Fig.
23 & 24)
Warranty
We guarantee that from the time it is first purchased for a period of the legally valid required
warranty period (maximum 3 years) this sprayer will not exhibit any material or processing
errors. If defects are discovered during the warranty period, Nox-Crete, Inc. or the distributor
in your area will repair the sprayer without charging for the labor or material or (at the
discretion of Nox-Crete, Inc.) replace the sprayer itself or its defective parts.
If such defects are discovered, please contact us immediately. We require a copy of the
invoice or cash register receipt for purchase of the device.
The warranty does not include wearing parts (seals, O-rings, diaphragm, etc.) or defects
which have occurred due to improper use or unforeseeable circumstances.
CE Declaration of Conformity
Products of series PERFECT (3615) meet the requirements of Pressure Equipment
Directive 97/23/EC and bear the CE marking .