6
www.nowsonic.com
Rear Panel Controls
1) Balanced XLR Inputs
Two 3-pin XLR input connectors are provided.
2) MODE Selection
Three modi are provided. Stereo, Parallel and Bridge.
3) 2-Way Binding Post Jacks
One pair per channel, accepts banana plugs or bare wire.
Note:
Binding post outputs on European models come with safety
plugs installed to prevent European power plugs from being inserted.
Please use the side entry positions with European models.
4) ¼-inch Inputs
Two ¼-inch input connectors are provided.
5) RCA(Phono) Inputs
Two RCA inputs are provided. (One per channel)
6) 4-Pole Speakon Output Connectors
These two connectors accept 2-pole or 4-pole Speakon connectors.
The channel connector is wired for both channels so it can be used
for bridged mono wiring or stereo wiring of two speakers to a single
Speakon.
Get Started
Stereo Mode
This is the default mode the amplifier is set to from the factory.
Connect left/right signal source to channel 1 and channel 2 using
either the XLR, ¼-inch or RCA connectors.
Connect a speaker to each channel output using Speakon, Banana
Plugs or bare wire.
TITAN 520
User manual
EN
1
1
2
3
4
5
6
7
TITAN_520_Bedienungsanleitung_DINA4_V02.indd 6
06.05.13 16:00
