In case of use of a wired GyroSet Glory to GyroSet Link connection please use the stan-
dard cable provided with the headset. The shape of the connectors are designed so that
they seal the interfaces from water and are not interchangeable with each other:
Connecting the Data cable to the GyroSet Link
Connecting the Data cable to the GyroSet Glory
Please make sure that the wiring meets the following criteria:
• The GyroSet Link must be properly connected to PGDT Omni or IOM:
• Cable that connects to the wheelchair controller must be secured with screws.
• Cable that connects to the wheelchair must be tightened to the frame to avoid
accidental crushing by the movement of actuators.
• Cable placement shall not allow accidental crushing if the wheelchair hits an
obstacle.
• The analogue connector should be connected to Omni Port-1 or IOM INPUT only.
11
Summary of Contents for Gyroset Link
Page 2: ...2...
