– 69 –
6.2.3 Cleaning in the event of spillage into the device
- Follow the steps described in 6.2.1 and 6.2.2.
- Remove the upper collection containers from the tower and
clean if necessary.
- Remove the collection safety and clean if necessary.
- In the case of spillage of large quantities of fluid, slide the
lower collection containers from the underside of the extraction
hood and clean if necessary.
Follow the steps in the reverse order to make the device ready
for cooking again.
– Press the
button after all parts are reinstalled.
6.2.4 Cleaning the Monoblock recirculation filter (only
with recirculation)
If recirculation has been selected, the device has been
connected to an built-in recirculation box with a Monoblock
recirculation filter.
Regenerating the Monoblock recirculation filter:
– The Monoblock can be regenerated up to 12 times. This is
done in the oven.
– Place the filter in the oven for 1 hour at 120°C. Provide
sufficient fresh air in the room where the oven has been
placed, as smells can be released. Smells can be released
when baking certain kinds of fish. The best solution for this is
to immediately regenerate the filter.
After cleaning:
– Return the Monoblock recirculation filter into the built-in
exhaust box.
– Press the
control key for 3 seconds.
1821_110119_GA2.indd 69
19/02/18 23:14
Summary of Contents for Panorama 1821
Page 19: ...Mode d emploi 1821 Panorama 1821_110119_GA2 indd 19 19 02 18 23 14 ...
Page 37: ...Bedienungsanleitung 1821 Panorama 1821_110119_GA2 indd 37 19 02 18 23 14 ...
Page 55: ...User manual 1821 Panorama 1821_110119_GA2 indd 55 19 02 18 23 14 ...
