NVR
-
6432
-
H2/F
User
’
s manual (Short) ver.1.1
All rights reserved © AAT Systemy Bezpieczeństwa sp. z o.o.
10
2.7.
Connecting external devices
•
Connecting audio ports
Audio output signal normally are above 200mV @1k
Ω
load. You can connect to it the audio amplifier
with the external speakers.
•
Connecting USB devices
NVR has 1 x USB 2.0 port on front and one 1 x USB 2.0 and 1 x 3.0 USB port on back panel . They
could be used for connecting external Flash memory, mouse connection and other USB compatible
devices. To connect storage memory it is recommended to use port USB 3.0
•
Connecting alarms ports
The NVR
-
6432
-
H2/F network recorder has alarm inputs and outputs. The alarm inputs are marked in
the ALARM
-
IN section. The individual inputs should be connected as shown in the figure below:
An example of connecting the alarm output no. 1 should be done as shown below:
STARTING THE DEVICE
GND
Alarm in
Alarm out
RS485
ALARM
IN1 IN2 IN3 IN4
GND
CZUJNIK
NO1 COM1
ALARM
Power
source
