NVR
-
6316
-
H1
-
II
User
’
s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
8
STARTING THE DEVICE
2.4. Connecting monitor
The recorders have HDMI and VGA connectors.
Following resolutions are supported for HDMI output : 1280x1024, 1920x1080, 3840x2160
WARNING
:
Emergency switching of the screen resolution is possible after pressing the right mouse button
after more than 5 seconds until you hear a sound signal from the recorder.
2.5. Connecting camera and Network
The recorder requires the use of a switch to connect cameras. The permissible cable distance from the
switch to each network device is 100m. Cameras, Internet and other devices should be connected as
shown below.We recommend configuring the cameras before connecting to the recorder as described
in the camera user's manual. Please remember that the cameras should be addressed with a unique IP
address supported by the recorder. Connecting cameras and network devices to the recorder
Before configuring the connection of cameras in the recorder, we recommend using a PC to configure
the cameras in accordance with the camera instructions.
NETWORK
SWITCH
INTERNET
PC
NOVUS NVR
IP CAMERAS
