NVR
-
6316
-
H1
-
II
User
’
s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
16
If you are having problems connecting to the camera, you must enter the correct user name in the
USER NAME and password in the PASSWORD field and then press the OK button to save the
settings. If the NVR is connected to the camera STATUS is displayed as Connected. To remove a
camera from the list, press the in DELETE column.
IV. Record Settings :
You can set one of the modes:
MANUAL RECORD SETTINGS
-
You can set the recording time from the moment you select the
manual recording from 1 minute to 1 hour or manually off recording.
AUTO
-
set all the cameras on one of the following modes :
-
MOTION RECORD
-
starts recording after receiving motion detection information from the
camera.
-
SENSOR RECORD
-
starts recording after alarm generated on alarm input
-
MOTION SENSOR RECORD
-
starts recording after motion detecion alarm and after
alarm from alarm inputs
NVR OPERATING
