NVR
-
6316
-
H1
-
II
User
’
s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
2
IMPORTANT SAFEGUARDS AND WARNINGS
THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:
Information
The device, as a part of professional CCTV system used for surveillance and control, is not designed for self installation in households by
individuals without technical knowledge. The manufacturer is not responsible for defects and damages resulted from improper or
inconsistent with user
’
s manual installation of the device in the system.
ATTENTION!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT PROVISIONED FOR THE GIVEN PRODUCT IN ITS USER
’
S MANUAL AND OTHER DOCUMENTS
DELIVERED WITH THE PRODUCT, OR THAT ARISES FROM THE NORMAL APPLICATION OF THE PRODUCT, ITS MANUFACTURER MUST BE CONTACTED
OR THE RESPONSIBILITY OF THE MANUFACTURER FOR THE RESULTS OF SUCH AN ACTION SHELL BE EXCLUDED.
1.
Prior to undertaking any action please consult the following manual and read all the safety and operating instructions before starting the device.
2.
Please keep this manual for the lifespan of the device in case referring to the contents of this manual is necessary;
3.
All the safety precautions referred to in this manual should be strictly followed, as they have a direct influence on user
’
s safety and durability and
reliability of the device;
4.
All actions conducted by the servicemen and users must be accomplished in accordance with the user
’
s manual;
5.
The device should be disconnected from power sources during maintenance procedures;
6.
Usage of additional devices and components neither provided nor recommended by the producer is forbidden;
7.
You are not allowed to use the device in high humidity environment (i.e. close to swimming pools, bath tubs, damp basements);
8.
Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers etc.) is not recommended since it may lead to heat
build
-
up and damaging the device itself as a consequence;
9.
Mounting the device on unstable surface or using not recommended mounts is forbidden. Improperly mounted device may cause a fatal accident or
may be seriously damaged itself. The device must be mounted by qualified personnel with proper authorization, in accordance with this user
’
s
manual.
10.
Device should be supplied only from a power sources whose parameters are in accordance with those specified by the producer in the devices
technical datasheet. Therefore, it is forbidden to supply the devices from a power sources with unknown parameters, unstable or not meeting
producer
’
s requirements;
11.
You cannot allow any metal objects get inside the recorder. It might cause serious damage. If a metal object gets inside the device contact the
authorised Novus service immediately.
12. The manufacturer does not bear responsibility for damage or loss of data stored on HDDs or other media occurred during the usage of the product.
Due to the product being constantly enhanced and optimized, certain parameters and functions described in the manual in question may change
without further notice.
We strongly suggest visiting the www.novuscctv.com website in order to access the newest manual .
Technical changes reserved without prior notice and printing errors possible.
DIRECTIVE
2014/30/EU
OF
THE
EUROPEAN
PARLIMENT
AND OF THE COUNCIL of 26 February 2014
on the harmonisation
of the laws of the Member States relating to electromagnetic compatibility
(OJ L 96, 29.3.2014, p.
79
–
106,
with changes)
DIRECTIVE
2014/35/EU
OF
THE
EUROPEAN
PARLIAMENT
AND OF THE COUNCIL of 26 February 2014
on the harmonization
of the laws of the Member States relating to the making available on the market of electrical
equipment designed for use within certain voltage limits.
DIRECTIVE
2012/19/EU
OF
THE
EUROPEAN
PARLIAMENT
AND OF THE COUNCIL
of 4 July 2012
on waste electrical and electronic equipment
(WEEE) (OJ L 197, 24.7.2012, p.
38
–
71,
with changes)
DIRECTIVE
2011/65/EU
OF
THE
EUROPEAN
PARLIAMENT
AND OF THE COUNCIL of 8 June 2011
on the restriction of the use
of
certain
hazardous
substances
in
electrical
and
electronic
equipment
(OJ L 174, 1.7.2011, p.
88
–
110,
with changes)
