NVR-5404POE User’s manual (Short) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
9
NVR OPERATING
Note:
To ensure recording stability from an overloaded network traffic, or unauthorised access, it is strongly
recommended to create separate network secured by router firewall from the user network.
2.6. Peripheral device connection
Connecting audio ports
Audio output signal normally are above 200mV 1kΩ. You can connect the low impedance earphone, or
power amplifier with the external speakers.
Connecting USB devices
NVR has 2 x USB 2.0 ports for external Flash memory, mouse connection and other USB compatible
devices. 1 USB port is located at back panel and 1 USB port at front panel.
Connecting USB devices
NVR has RS-485 interface. For connecting please refer table below:
3. NVR OPERATING
3.1.
Front panel description
1.
LED
Shows power, recording, network connection or active alarm statuses.
2.
USB
USB 2.0 port for external Flash memory and mouse connection.
3.2. Controlling via USB mouse
It is possible to control NVR via an USB mouse connected to the USB port. Double-clicking on any
camera in split screen display mode switches the display to full-screen mode. Subsequent double-click
returns to previous display mode. Move cursor to the top or click the right key of mouse to bring up
MAIN MENU and select START icon.
Certain positions allow to select them via mouse scroll. Depending on NVR operating mode, pressing
RMB displays a corresponding function menu.
1
2
485 +
485 -
RS485
