NVR-3304, NVR-3308, NVR-
3326 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
22
PORT - Enter the port used to transfer data from the camera.
USERNAME - Enter the user name used to connect to the camera.
PASSWORD - Enter the user name used to connect to the authorization of the camera.
REMOTE DETECT - After completing of the above settings, click the DETECT button. NVR
will connect with the camera and return the connection status.
REMOTE CHANNEL - When connecting to the camera set this number to 1.
Check the OPEN checkbox to make turn the channel on.
To search for available cameras click on SEARCH button.
Make sure that protocol type is set to ONVIF and press SERACH button. Wait for a while until the
NVR find available cameras. Double-click on the selected camera to transfer settings to the NET
CHANNEL tab. You can then input valid password and username and click DETECT to check if NVR
is able to connect with camera.
Make sure to check the OPEN check box to activate channel and press APP. button to enable camera .
To copy camera settings to other channels click COPY button and select the channels which do you
want to copy settings. Please note that IP address is also copied, so you have to change it manually in
copied channels.
To save settings and exit menu press OK button.
NVR OPERATING
