NVR-3304, NVR-3308, NVR-
3326 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
11
Then connect the power supply and use the supplied cables to connect the SATA drives to the NVR
motherboard .
Replace the cover and secure it with 6 screws.
2.3. Connecting power adapter.
NVR-3304
Connect the cable end from power supply supplied with the NVR-em into the power socket marked
DC 12V in NVR. Plug power supply into mains, device should start after connecting to power source.
Wait about 2 minutes to start working with NVR.
STARTING THE DEVICE
