NVR-3304, NVR-3308, NVR-
3326 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
21
Note:
Be sure that IP addresses and subnet mask of the NVR and the IP cameras are in the same network
subnet (e.g. for the NVR IP address 192.168.1.100, and mask 255.255.255.0 appropriate address for
the camera ranges from 192.168.1.1 to 192.168.1.254, for example 192.168.1.201). It is not allowed to
set the same addresses for multiple devices
Optionally if you are going to connect NVR to the Internet (for remote access, sending email, etc) set
up :
GATEWAY,
FIRST and ALTENRATE DNS.
You can alternatively check DHCP mode (DHCP server is required in this method in target network)
then all settings will be set up automatically. When you use DHCP server check IP address lease and its
linking with NVR MAC address to avoid changing or losing IP address during device operation or
network/DHCP server breakdown. This solution is not recommended for security systems.
Connecting cameras
To configure cameras to work with NVR click on VIDEO button from MAIN MENU and go to
NET CHANNEL tab.
You can input data for connecting camera manually or search network for cameras available.
Set following fields to connect with camera.
CHANNELS - select desired channel number
PROTOCOL TYPE -set protocol supported by camera ( default ONVIF )
REMOTE IP - IP address of the camera
NVR OPERATING
