NVIP-TDN5410C/MPX1.0, User’s manual ver.1.0.
All rights reserved © AAT Holding sp. z o.o.
37
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
software (web browser level) resetting the camera settings
hardware (using reset) restores factory defaults.
6.1. Restoring software factory defaults
Factory software default restores default settings of the IP camera except network settings. The camera
re-starts then, taking about one minute to complete. Option to restore the factory default is described in
SYSTEM UPDATE
(chapter 4.2.1, point “c “) tab.
6.2. Restoring hardware factory defaults in IP cameras
In order to restore factory defaults for the camera please follow the instructions:
1. Turn the device on
2. Press the
DEFAULT
button located at the rear of IP camera
3. Turn the camera on holding the button for 30 seconds.
4. Release the button after successful initialization
5. Log on after approx. 1 minute using default IP address (http://192.168.1.200) and default user name
(root) and password (pass)
In the NVIP-TDN5410C/MPX1.0 reset button is located as depicted below. Non metal, thin object
(e.g. match) is recommended for pushing it.
RESTORING FACTORY DEFAULTS
