NVIP-TDN5410C/MPX1.0, User’s manual ver.1.0.
All rights reserved © AAT Holding sp. z o.o.
20
WWW INTERFACE - WORKING WITH IP CAMERA
c. System update -
tab responsible for upgrading firmware, saving and restoring default camera
settings.
Firmware upgrade - Upgrades the camera with a new firmware
To update firmware online, please click the
BROWSE
button and then select new f/w file (.bin
extension). Next, click
UPGRADE
and confirm with
OK
to proceed.
Caution:
Please contact your local distributor prior to software upgrade.
Caution:
You should close all other programs and access only single camera in the Internet Explorer
browser at once. Power failure or turning off the device while upgrading the software results in
camera damage and necessity for service repair
.
Reboot system - pressing the
START
button restarts camera
Factory default - pressing the
START
button restores default settings ( except the IP address)
Setting management - allows to export settings directly to a PC, or upgrade from previous using
saved settings
