NVIP-5DN3615AV/IR-1P/F - User’s manual (short form) ver 1.0
All rights reserved © AAT Holding S.A.
8
1.4. Package contents
After you open the package make sure that the following elements are inside:
IP camera
230 VAC / 12 VDC power supply
Accessories bag
Short version of user’s manual
CD containing manual and software
If any of this elements has been damaged during transport, pack all the elements back into the original
box and contact your supplier for further assistance.
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
2.START-UP AND INITIAL IP CAMERA CONFIGURATION
2.1 Description of connectors and control tools
1. BNC video output
2. Audio output
3. Audio input
4. Power supply 12VDC
5. 100 Mb/s Ethernet port (RJ-45 connector)
6. Alarm COM - Alarm output
7. Alarm NO - Alarm output
8. Alarm IN - Alarm input
9. Alarm GND - Alarm input
10. RS485 T+
11. RS485 T-
1. microSD card slot
2. Reset button
3. Network indicator
4. 3 pin connector. Video output and power supply input- maintenance only
NOTICE!
To get access to above ports it is required to remove camera dome cover.
5. IR LED
6. Light sensor
7. Screw locking camera base
START-UP AND INITIAL CAMERA CONFIGURATION
1
2
4
3
11
6
7
8
9
10
5
6
7
3
2
1
4
