NVIP-5DN3615AV/IR-1P/F - User’s manual (short form) ver 1.0
All rights reserved © AAT Holding S.A.
15
If the installation fails, changing security settings for the IE browser is required. In order to do that,
please choose:
Tools > Internet options > Security tab > Custom level
and:
Under
Download unsigned ActiveX controls
- select either Enable or Prompt
Under
Initialize and script ActiveX controls not marked as safe
- select Enable or Prompt
You can also add the camera’s IP address to “
trusted zone”
and set lowest security level for it.
In addition, when working in Windows Vista/7 the ActiveX applet may be blocked by Windows
Defender or User account control. In such case you should allow to run this applet, or simply disable
these functions.
After successful installation login window will be displayed. Default user is
root
and default password
is
pass.
For safety reasons, it is recommended to change default user name and password.
WARNING !!! If user forgets login and/or password for IP Camera, it is required to sent
IP Camera back to supplier. In this case, it is not possible for user to restore IP Camera factory
defaults on his own.
CAUTION!
The camera will ask you to change the default password the first time you log in. To do this, check the
Modify password
option and then enter and confirm the new password. In order to log into the camera
without changing the password, press the OK button. The message will be displayed each time you log
in, until you change your password or check the
Do not show again
option.
NETWORK CONNECTION UTILIZING WEB BROWSER
