NVIP-4DN3061V/IR-1P, NVIP-4DN3062V/IR-1P
-
User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding S.A.
20
ELECTRIC CONNECTORS AND ACCESORIES
6. RESTORING FACTORY DEFAULTS
Camera allow to restore defaults via:
software (web browser level)
software (NMSiptool level)
Hardware (reset button) - only NVIP-4DN3062V/IR-1P camera
6.1. Restoring factory defaults by software means
User can restore default settings of the IP camera except network settings. To restore to default settings
go to: “Advanced Config
-
> Config Backup & Restore” tab. Process of restoring takes about two
minutes.
6.2. Restoring factory defaults by software means (NMSiptool level)
NMSip (version 1.23.4 or later) allows to restore factory defaults. To restore settings find camera via
NMSiptool, click right mouse button and choose “ Restore default configuration”. Next, within 30
seconds, it is required to turn the camera power off and on.
