NVIP-4DN3061V/IR-1P, NVIP-4DN3062V/IR-1P
-
User’s manual (short form) ver 1.0.
All rights reserved
© AAT Holding S.A.
11
2.3. Connecting ethernet cable
To maintain tightness of ethernet cable connection, please follow instruction below:
1. Loosen the nut (a) from the main element (b).
2. Run power cable (without RJ-45 connector) though both elements. Then crimp the cable with RJ-45
connector.
3. Connect the cable to the hermetic connector (c), screw main cover (b), then screw the nut (a).
WARNING!
Other camera connectors are not hermetic. User should seal connectors by himself.
START-UP AND INITIAL IP CAMERA CONFIGURATION
a
b
a
b
c
