NVIP-4DN2004H/IR-1P-II - User’s manual (short) ver 1.0
All rights reserved © AAT Holding S.A.
17
ELECTRIC CONNECTORS AND RESTORING FACTORY DEFAULTS
5. ELECTRIC CONNECTORS
5.1. Connecting power supply to the camera.
Camera can be supplied using external power supply unit corresponding with the camera parameters or
by using RJ45 network socket and PoE (802.3af) power supply unit.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
WARNING!
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
Caution:
It is forbidden to use – as the camera power source – PoE equipment (adapters, etc.) not
compatible with IEEE 802.3af standard (items called “passive PoE power supply”). Damages that
results from the usage of improper power supply source are not covered by the warranty.
6. RESTORING FACTORY DEFAULTS
6.1. Restoring factory defaults
Camera NVIP-4DN2002H/IR-1P-II allows you to reset your settings to the factory values. To restore
the camera settings to the default, go to the
"Load Default"
tab (Remote Setting -> Advanced -> Load
Default). Then select options and functions of the camera whose settings are to be reset and press the
"Save"
button. After about 30 seconds, you can re-connect to the camera (at the current IP address, as
long as it was not reset network settings or on the default IP address).
7. INSTALLING SD CARD
The microSD card slot is located in the back of the camera case, under the cover.
Information
A description of all functions of the camera is included in the full user manual, posted on the product
page on
www.novuscctv.com/en
