NVIP-3DN7540H/IRH-
2P User’s manual ver.1.0 (short form)
All rights reserved © AAT Holding sp. z o.o.
10
2.3.
Desiccant mounting guide
To prevent moisture from condensing on IP Camera’s Glass Cover, we strongly suggest you to place
the desiccant in the IP Camera before installing and replace a new one every time when opening the
Front Cover.
Description of desiccant usage:
1.
Unscrew the screw on Camera Housing and remove
the Front Cover
2.
Carefully tear open the aluminium desiccant bag along
the slit on one edge and take the desiccant out.
Remove the paper backing of the double sided tape on
one side of the desiccant and firmly place the
desiccant on the spot as the figures on the right side.
3.
Install the Front Cover back in position and tighten
the screw.
START-UP AND INITIAL CAMERA CONFIGURATION
