NVIP-3DN3630SD/IRH-2 User’s manual (short form) ver.1.0
All rights reserved © AAT Holding S.A.
8
START-UP AND INITIAL CAMERA CONFIGURATION
2.2. Mounting the camera
In order to obtain declared degree of protection please seal the mounting place additionally with
appropriate sealing mass, paying special attention to mounting holes.
The declared degree of protection of the camera relates to its housing and does not take into account
the possibility of moisture infiltration into the interior of the camera by connecting cables.
Connection cables protection through i.e. sealing up is the responsibility of the camera installer. The
manufacturer is not liable for any damages to the camera caused as a result of failing in performing
that activity by installer, which also means that camera damaged in that way is not subject to
warranty repairs.
CAUTION!
Due to safety reasons, maximum load capacity of surface shouldn’t be less than 25kg.
To mount the camera please become familiar with the following procedure:
unplug the cables and remove the base tray
Fasten the tube to the bracket.
