NVIP-3DN3630SD/IRH-2 User’s manual (short form) ver.1.0
All rights reserved © AAT Holding S.A
19
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
Software (web browser level)
Hardware (using reset button)
6.1.
Software restoration of factory settings the IP camera
User can restore default settings. To restore to default settings go to:
Maintenance -> Backup and
Restore
tab. Choose option Default settings and select witch of the options should remain unchanged.
Click
Load Default
button
6.2.
Hardware restoration of factory settings the IP camera
In order to restore factory defaults for the camera please follow the instructions:
Unscrew the screws holding cover at the back of the dome
Press the
RESET
button (when camera is powered) and hold on for about 10 seconds
Release button
Wait until the camera starts (finished positioning of the dome) - it takes abort 2 minutes
Turn power off, mount cover back, turn the camera on
Log on using default IP address (http://192.168.1.200) and default user name (root) and password
(pass)
RESTORING FACTORY DEFAULTS
