NVIP-3C7000D-P, NVIP-5C7000D-P User’s manual(short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
20
5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. Connecting power supply to the camera.
The camera is supplied by using RJ45 network socket. To run NOVUS IP camera you have to connect
ethernet cable between camera and network switch with PoE support (IEEE 802.3af). You can also use
a power injector compatible with
IEEE 802.3af standard.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
5.3. SD card installation
Camera supports SD and SDHC cards with their capacity up to 32GB. In order to install the card
properly, please follow the instructions below:
Format the card in FAT32 file system using a PC computer
Turn the camera off
Mount SD card in the socket located at the camera’s rear, according to the picture:
Turn the camera on
Check the SD card by checking its capacity in the
STORAGE MANAGEMENT
tab
.
ELECTRIC CONNECTORS AND ACCESORIES
