NVIP
-
3000 series IP camera user’s manual
All rights reserved © AAT Holding S.A.
20
USING AND CONFIGURING
5.4 Alarm
5.4.1 Motion Detection
Alarm Config
To turn alarm on, user needs to select
ENABLE
ALARM
option. After that he define time of alarm
(from 5 seconds to 2 minutes). Trigger rerecord and
snapshot on SD card. He can also use
TRIGGER E
-
option to send alarm pictures on specific ad-
dress e
-
mail, (configuration of e
-
mail address look
page 23). In the same way user can configure camera
to send alarm pictures on
FTP
server (configuration
of
FTP
server look page 24).
(Alarm output, and SD card recording/snapshot avail-
able on selected models)
Area and Sensibility
For proper motion detection user needs to define zone for alarm. Using the slider user choose sensi-
tivity of camera depends of needs. To add areas user need to click
DRAW
button and then select ar-
ea on the preview. There is also a possibility to select
SELECT ALL
button or
CLEAR ALL
. Last
option is
INVERT
button who switch selected zones with non selected areas.
