NVIP
-
3000 series IP camera user’s manual
All rights reserved © AAT Holding S.A.
15
Frequency
-
switches camera between 50Hz and 60Hz mode (change frequency will restart the de-
vice)
Day/Night mode
-
switches camera between Day/Night mode. Available options:
Auto, Day,
Night,
Schedule
Sensitivity
-
settings for camera day/night switching sensor, possible settings:
HIGH, MID, LOW
Infra
-
red Mode
-
allows user to manual switch camera IR Illuminator, independently to current day
or night mode. Available options:
AUTO, ON, OFF
Exposure Mode
-
after switch to manual mode user can define shutter value form 1/1 to 100000,
default 1/25
Corridor Pattern
-
rotates image by 90, 180 or 270 degrees.
Image Mirror
-
turns on mirror mode.
Image Flip
-
flips image horizontally
5.2.2 Video/Audio
Main stream
-
allows to chose resolution from available options (different depending on camera
model). Also define
Frame Rate
(fps) for current stream from 1 to 25 (or 30 in 60Hz). Each stream
can be configured separately.
VBR
-
variable bitrate, defines size of current stream, it will change based on set
Video Quality
CBR
-
constant bitrate, constant value of stream dependent on chosen value of bitrate.
Bitrate
-
can be changed only in
CBR
mode and depends from camera model. Value of stream will
be changed depending on the option selected. Value can be set manual by user.
Video Quality
-
can be changed only in
VBR
mode. Can be selected from possible options:
High-
est, Higher, Medium, Lower, Lowest.
Value of bitrate will be changed depending on chosen op-
tion
I Frame Interval
-
defined value of base frame
Video Compression
-
video compression selection H.264/H.265 and MJPEG
Profile
-
chose available settings for current stream
USING AND CONFIGURING
