NVIP-2DN5002V/IRH-
1P User’s manual ver.1.0
(short form)
All rights reserved © AAT Holding S.A.
19
5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. Connecting power supply to the camera.
The camera can be supplied by using RJ45 network socket or by power connector. To run NOVUS IP
camera you can connect ethernet cable between camera and network switch with PoE support (IEEE
802.3af). You can also use a power injector with (IEEE 802.3af) PoE standard. Use power supplay with
parameters compatible with camera specification to power camera via power in jack.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution:
Make sure to follow the correct polarity if connecting the camera to DC power. Polarity is
marked on the power connector.
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
5.2. Connecting audio inputs/outputs.
5.3. SD card installation
Camera supports microSD and microSDHC cards with their capacity up to 32GB. In order to install the
card properly, please follow the instructions below:
Turn the camera off
Mount microSD card in the socket , according to the picture:
ELECTRIC CONNECTORS AND ACCESORIES
Color
Description
White
RCA Audio input
—
Connect to a self-powered microphone
for listen-in audio.
Red
RCA Audio output
—
Connect to anamplifier or self-powered
speaker for intercom/2-way audio
microSD
