NVIP-3000 series IP camera user’s manual
All rights reserved © AAT Holding S. A.
19
4.3 Alarm
4.3.1 Motion
Alarm Config
To turn alarm on user need to select
ENABLE
ALARM
option. After that he define time of
alarm (from 5 seconds to 2 minutes). He can
also use
TRIGGER E-MAIL
option to send
alarm pictures on specific address e-mail,
(configuration of e-mail address look page
23). In same way user can configure camera
to send alarm pictures on
FTP
server
(configuration of
FTP
server look page 24).
Area and Sensibility
For proper motion detection user need to define zone for alarm. Using the slider user choose
sensitivity of camera depends of needs. To add areas user need to click
DRAW
button and then
select area on the preview. There is also a possibility to select
SELECT ALL
button ro
CLEAR
ALL
. Last option is
INVERT
button who switch selected zones with non selected areas.
CONFIG
