NVIP-1DN3000V/IR-1P, NVIP-1DN3001V/IR-1P, NVIP-2DN3000V/IR-1P,
NVIP-2DN3001V/IR-1P - Skrócona instrukcja obsługi wer. 1.0.
All rights reserved © AAT Holding sp. z o.o.
9
START-UP AND INITIAL IP CAMERA CONFIGURATION
2.2 Zoom and focus adjustment
Function available only for NVIP-1DN3001V/IR-1P and NVIP-2DN3001V/IR-1P cameras.
Adjust the focus zoom with small flat blade.
2.3 Camera mounting
1. Remove camera base by turning it counter-clockwise.
2. Use the included mounting template or the camera base plate to
mark holes for mounting screws.
3. Drill holes in marked places and optionally make an extra hole
for camera cables.
3. Mount the camera base to the surface using the included
mounting screws (please pay an extra attention to cable routing).
4. Fit camera into base, adjust position as needed. Then tighten the
cover and locking screw (3).
6. Connect camera cables.
7. Adjust camera zoom and focus with small flat blade (after
starting IP Camera, details in chapter 2.4).
Focus adjustment
Adjust wrench
Zoom adjustment
3
