NVIP
-
12F
-
8001, User
’
s manual (short) ver.1.0
All rights reserved © AAT Holding S.A.
10
2.2. Camera mounting
•
Rotate and remove the masking element (1).
•
Use the L
-
wrench in the accessory package to unscrew the star screws (2), remove the installation
bracket (3).
•
Use the included mounting template or the camera base plate to mark holes for mounting screws.
•
Drill holes in marked places and optionally make an extra hole for camera cables.
•
Mount the installation bracket (3) using included mounting screws.
•
Use screws (2) to mount camera to the installation bracket.
•
Mount the masking element (1).
Caution : Make sure to follow the correct polarity if connecting the camera to DC power.
Polarity is marked on the power connector.
START
-
UP AND INITIAL CAMERA CONFIGURATION
2
2
2
2
3
1
3
2
2
2
2
1
