All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
15
User Manual for NMS NVR and NVSO
version 1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
15
DISK MOUNTING PROCEDURE
8.
After attaching the disk adapters, remove the drive cage from the chassis by removing the
fastening screws
(1)
and be cautious of the grounding wire.
The cage has four drive bays, three of them are 5.25" and should accommodate drives equipped with
3.5" to 5.25" converters, while the lowest space is 3.5" and is designed for a drive without a converter.
9.
After removing the disk cage install previously prepared drives starting from the upper part of
the cage.
10.
Then screw the cage with the mounted disks back to the chassis and remember to attach the
grounding wire.
5,25”
3,5”
1
