NHDR-5104AHD, NHDR-5108AHD, NHDR-5116AHD
User's manual (short) ver. 1.0
All rights reserved © AAT Holding S.A.
9
Before staring the process make sure the power supply isn’t connected.
In order to mount HDD, please unscrew screws on the back and both sides as depicted below and
remove top cover.
Depending the model follow the instructions:
NHDR-5104AHD
SATA and power cables are attached to the mainboard. Put the HDD at the shown place.
Move DVR to the side holding HDD by hand, and screw it tightly from the bottom.
STARTING THE DEVICE
HDD
