NDR-BA3208,NDR-BA3416
User’s manual ver.1.1 (short)
All rights reserved © AAT Holding sp. z o.o.
13
3. RECORDER’S OPERATION
3.1.
Front panel description
1. REC
pressing the REC button starts recoding of all camera channels. Enabling panic
starts simultaneous recording on all camera channels.
In PTZ control mode button is used for FOCUS adjustment.
2. PLAY / PAUSE
pressing the PLAY during “live” mode enters playback mode. Subsequent
pressing pauses the playback.
In PTZ control mode button is used for IRIS adjustment.
3. REW
Consecutive presses in playback mode switch playback speed between RWx8,
RWx16, RWx32, FFx1.
4. FF
Consecutive presses in playback mode switch playback speed between FFx1,
FFx2, FFx4, FFx8, FFx16, FFx1/4, FFx1/2.
In PTZ control mode button is used for SPEED adjustment.
5. MENU
pressing the MENU button enters recorder’s settings menu (after correct login).
Menu functions are detailed in the following chapters of this manual.
In PTZ control mode button is used to increase value of a particular field.
6. BACKUP
pressing the button allows you to enter the backup menu.
In PTZ control mode button is used to decrease value.
7. ESC / STOP
Pressing the button either exits menu or moves to a higher-level menu. When
pressed during playback, leaves playback mode. Holding the ESC switches
OSD menu displaying between VGA and BNC outputs.
8. NAVIGATION BUTTONS
: navigate through DVR menu and change values of particular
parameters
9. USB
USB 2.0 port for backing up the recordings either to external HDDs or Flash
drives. Length of connecting cable should not exceed 30 cm;
10. LED:
LEDs indicating DVR’s status:
-
Power
- power supply indicator
-
Net
- network operation
-
HDD
- HDD operation indicator
-
Play
- playback
-
Backup
- archiving data
-
REC
- recording
11. IR DETECTOR
IR remote controller receiver. Do not cover.
RECORDER’S OPERATION
11
10
1
3
2
4
5
6
7
9
8
