NOVUS AUTOMATION
www.fieldlogger.net
83/104
%ALARM__001.UNI%
Alarm 1 configured condition: “>”, “>=”, “<”, “<=”, “==” or “!=”
%ALARM__001.HYS%
Alarm 1 configured unit
...
...
%ALARM__032.TAG%
Alarm 32 tag
%ALARM__032.STS%
Alarm 32 status: “ON” (active alarm) or “OFF” (not active)
%ALARM__032.SPT%
Alarm 32 configured setpoint
%ALARM__032.CND%
Alarm 32 configured condition: “>”, “>=”, “<”, “<=”, “==” or “!=”
%ALARM__032.UNI%
Alarm 32 configured unit
%ALARM__032.HYS%
Alarm 32 configured hysteresis
%INFO.IN.FLTAG_%
FieldLogger
tag
%INFO.IN.SERIAL%
Serial Number
%INFO.IN.FWVER_%
Firmware version
%INFO.IN.MBMODE%
Main RS485 interface Modbus mode:
"Disabled", "Master" ou "Slave"
%INFO.IN.MBADDR%
Main RS485 interface Modbus address
%INFO.IN.D_TYPE%
Selected logging memory: “Flash” or “SD Card”
%INFO.IN.START_%
Start logging mode selected:
"Immediately", "Date/Time", "Alarm" ou "Via Modbus Only"
%INFO.IN.STOP__%
Stop logging mode selected:
"Full Memory", "Circular Memory", "Date/Time" ou "Alarm"
%INFO.IN.FDRVIN%
USB flash drive connection status:
“Yes” (connected) or “No” (disconnected)
%INFO.IN.SDSIZE%
SD card memory capacity, in kbytes
%INFO.IN.SDFREE%
SD card available free memory, in kbytes
%INFO.IN.INSIZE%
Internal flash memory capacity, in bytes
%INFO.IN.INFREE%
Internal flash available free memory, in bytes
%INFO.IN.ANLSCN%
Analog channels scan interval, in ms
%INFO.IN.LOGPER%
Logging interval, in ms
%INFO.IN.LOGSTS%
Current logging status: “Logging” or “Stopped”
%INFO.IN.HMICON%
HMI connection status: “0” (no HMI) or “1” (HMI connected)
%INFO.RTC.YEAR_%
Internal calendar year
%INFO.RTC.MONTH%
Internal calendar month
%INFO.RTC.DAY__%
Internal calendar day
%INFO.RTC.HOUR_%
Internal clock hour
%INFO.RTC.MIN__%
Internal clock minute
%INFO.RTC.SEC__%
Internal clock second
Examples
There are examples available for download in the product website and also in the product CD.
