NOVUS AUTOMATION
www.fieldlogger.net
20/104
DEFINITION AND SELECTION OF SERIAL PORT (COM) - WINDOWS
The serial port associated with
FieldLogger
is automatically defined by the operating system a few moments after
connecting the
FieldLogger
. The user can easily identify or change the COM port associated with
FieldLogger
:
Control Panel / System / Hardware / Device Manager / COM & LPT Ports
Select the device "USB Serial Port" corresponding to the
FieldLogger
and click on "Properties". Select "Port Settings"
guide and click on "Advanced". In the "COM Port Number", select the serial port to be associated with
FieldLogger
.
Some serial ports can be checked while being used (In Use). Just select one of these ports if you know that it is not
being used by another peripheral device on your computer.
In some cases, the serial ports can be checked as in use even when the associated device is no longer installed on your
computer. In this case it is safe to associate this port to
FieldLogger
. The following figure presents the view of the device
manager containing a
FieldLogger
, and the screens showing the property screens where you can reset the associated
COM port.
